Add functionality for most buttons

This commit is contained in:
David Daily 2020-05-11 22:34:22 -05:00
parent 32aac7868f
commit ab70c607d6
7 changed files with 1089 additions and 63 deletions

149
MIDI/MidiRules.ahk Normal file
View File

@ -0,0 +1,149 @@
;*************************************************
;* RULES - MIDI FILTERS
;*************************************************
/*
The MidiRules section is for modifying midi input from some other source.
*See hotkeys below if you wish to generate midi messages from hotkeys.
Write your own MidiRules and put them in this section.
Keep rules together under proper section, notes, cc, program change etc.
Keep them after the statusbyte has been determined.
Examples for each type of rule will be shown.
The example below is for note type message.
Remember byte1 for a noteon/off is the note number, byte2 is the velocity of that note.
example
ifequal, byte1, 20 ; if the note number coming in is note # 20
{
byte1 := (do something in here) ; could be do something to the velocity(byte2)
gosub, SendNote ; send the note out.
}
*/
MidiRules: ; write your own rules in here, look for : ++++++ for where you might want to add
; stay away from !!!!!!!!!!
; =============== Is midi input a Note On or Note off message? ===============
if statusbyte between 128 and 159 ; see range of values for notemsg var defined in autoexec section. "in" used because ranges of note on and note off
{ ; beginning of note block
if statusbyte between 144 and 159 ; detect if note message is "note on"
;gosub, ShowMidiInMessage
;GuiControl,14:, StatusByteIn,%statusbyte%
;GuiControl,14:, ChanIn,%chan%
;GuiControl,14:, Byte1In,%byte1%
;GuiControl,14:, Byte2In,%byte2% ; display noteOn message in gui
if statusbyte between 128 and 143 ; detect if note message is "note off"
;gosub, ShowMidiInMessage
;GuiControl,12:, MidiMsOut, noteOff:%statusbyte% %chan% %byte1% %byte2% ; display note off in gui
; !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! above end of no edit
; =============== add your note MidiRules here ==; ===============
/*
Write your own note filters and put them in this section.
Remember byte1 for a noteon/off is the note number, byte2 is the velocity of that note.
example
ifequal, byte1, 20 ; if the note number coming in is note # 20
{
byte1 := (do something in here) ; could be do something to the velocity(byte2)
gosub, SendNote ; send the note out.
}
*/
; ++++++++++++++++++++++++++++++++ examples of note rules ++++++++++ feel free to add more.
ifequal, byte1, 20 ; if the note number coming in is note # 20
{
byte1 := (byte1 +1) ; transpose that note up 1 note number
gosub, SendNote ; send the note out.
}
ifequal, byte1, 30 ; if the note number coming in is note # 30
{
send , {NumLock} ; send a keypress when note number 20 is received.
}
; a little more complex filter two notes
if ((byte1 != 60) and (byte1 != 62)) ; if note message is not(!) 60 and not(!) 62 send the note out - ie - do nothing except statements above (note 20 and 30 have things to do) to it.
{
gosub, SendNote ; send it out the selected output midi port
;msgbox, ,straight note, note %byte1% message, 1 ; this messagebox for testing only.
}
IfEqual, byte1, 60 ; if the note number is middle C (60) (you can change this)
{
byte1 := (byte1 + 5) ;transpost up 5 steps
gosub, SendNote ;(h_midiout, note) ;send a note transposed up 5 notes.
;msgbox, ,transpose up 5, note on %byte1% message, 1 ; for testing only - show msgbox for 1 sec
}
IfEqual, byte1, 62 ; if note on is note number 62 (just another example of note detection)
{
byte1 := (byte1 -5) ;transpose down 5 steps
gosub, SendNote
;msgbox, ,transpose down 5, note on %byte1% message, 1 ; for testing only, uncomment if you need it.
}
; ++++++++++++++++++++++++++++++++ End of examples of note rules ++++++++++
} ; end of note block
; =============== all cc detection ----
; is input cc?
if statusbyte between 176 and 191 ; check status byte for cc 176-191 is the range for CC messages ; !!!!!!!! no edit this line, uykwyad
{
gosub, midiCCin
}
; Is midi input a Program Change?
if statusbyte between 192 and 208 ; check if message is in range of program change messages for byte1 values. ; !!!!!!!!!!!! no edit
{
; ++++++++++++++++++++++++++++++++ examples of program change rules ++++++++++
; Sorry I have not created anything for here nor for pitchbends....
;GuiControl,12:, MidiMsOut, ProgC:%statusbyte% %chan% %byte1% %byte2%
;gosub, ShowMidiInMessage
gosub, sendPC
; need something for it to do here, could be converting to a cc or a note or changing the value of the pc
; however, at this point the only thing that happens is the gui change, not midi is output here.
; you may want to make a SendPc: label below
; ++++++++++++++++++++++++++++++++ examples of program change rules ++++++++++
}
;msgbox filter triggered
; +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ end of edit section
Return
;*************************************************
;* MIDI OUTPUT LABELS TO CALL
;*************************************************
SendNote: ;(h_midiout,Note) ; send out note messages ; this should probably be a funciton but... eh.
;{
;GuiControl,12:, MidiMsOutSend, NoteOut:%statusbyte% %chan% %byte1% %byte2%
;global chan, EventType, NoteVel
;MidiStatus := 143 + chan
note = %byte1% ; this var is added to allow transpostion of a note
midiOutShortMsg(h_midiout, statusbyte, note, byte2) ; call the midi funcitons with these params.
gosub, ShowMidiOutMessage
Return
SendCC: ; not sure i actually did anything changing cc's here but it is possible.
;GuiControl,12:, MidiMsOutSend, CCOut:%statusbyte% %chan% %cc% %byte2%
midiOutShortMsg(h_midiout, statusbyte, cc, byte2)
;MsgBox, 0, ,sendcc triggered , 1
Return
SendPC:
gosub, ShowMidiOutMessage
;GuiControl,12:, MidiMsOutSend, ProgChOut:%statusbyte% %chan% %byte1% %byte2%
midiOutShortMsg(h_midiout, statusbyte, pc, byte2)
; COULD BE TRANSLATED TO SOME OTHER MIDI MESSAGE IF NEEDED.
Return

39
MIDI/MidiStart.ahk Normal file
View File

@ -0,0 +1,39 @@
#Persistent
#SingleInstance, force
SendMode Input ; Recommended for new scripts due to its superior speed and reliability.
SetWorkingDir %A_ScriptDir% ; Ensures a consistent starting directory.
;*************************************************
version = 1 ; Change this to suit you.
;*************************************************
readini() ; load values from the ini file, via the readini function - see Midi_under_the_hood.ahk file
gosub, MidiPortRefresh ; used to refresh the input and output port lists - see Midi_under_the_hood.ahk file
port_test(numports,numports2) ; test the ports - check for valid ports? - see Midi_under_the_hood.ahk file
gosub, midiin_go ; opens the midi input port listening routine see Midi_under_the_hood.ahk file
gosub, midiout ; opens the midi out port see Midi_under_the_hood.ahk file
;gosub, midiMon ; see below - a monitor gui - see Midi_In_and_GuiMonitor.ahk
;!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! end edit here
;*************************************************
;* VARIBLES TO SET @ STARTUP
;*************************************************
;cc_msg = 73,74 ; ++++++++++++++++ you might want to add other vars that load in auto execute section
return ; !!!! no edit here, need this line to end the auto exec section.
;*************************************************
;* END OF AUTOEXEC SECTION
;*************************************************
;*************************************************
;* INCLUDE FILES -
;* these files need to be in the same folder
;*************************************************
; include files below - you need each of these files in the same folder as this file for this to work.
/*
#Include Midi_In_and_GuiMonitor.ahk ; this file contains: the function to parse midi message into parts we can work with and a midi monitor.
#Include MidiRulesEdit.ahk ; this file contains: Rules for manipulating midi input then sending modified midi output.
#Include Midi_under_the_hood.ahk ; this file contains: (DO NOT EDIT THIS FILE) all the dialogs to set up midi ports and midi message handling.

View File

@ -0,0 +1,95 @@
/*
PARSE - LAST MIDI MESSAGE RECEIVED -
Midi monitor.
*/
;*************************************************
;* MIDI INPUT PARSE FUNCTION
;*
;*************************************************
; !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! no edit below here ....
MidiMsgDetect(hInput, midiMsg, wMsg) ; Midi input section in "under the hood" calls this function each time a midi message is received. Then the midi message is broken up into parts for manipulation. See http://www.midi.org/techspecs/midimessages.php (decimal values).
{
global statusbyte, chan, note, cc, byte1, byte2, stb
statusbyte := midiMsg & 0xFF ; EXTRACT THE STATUS BYTE (WHAT KIND OF MIDI MESSAGE IS IT?)
chan := (statusbyte & 0x0f) + 1 ; WHAT MIDI CHANNEL IS THE MESSAGE ON?
byte1 := (midiMsg >> 8) & 0xFF ; THIS IS DATA1 VALUE = NOTE NUMBER OR CC NUMBER
byte2 := (midiMsg >> 16) & 0xFF ; DATA2 VALUE IS NOTE VELEOCITY OR CC VALUE
pitchb := (byte2 << 7) | byte1 ;(midiMsg >> 8) & 0x7F7F masking to extract the pbs
if statusbyte between 176 and 191 ; test for cc
stb := "CC" ; if so then set stp to cc
if statusbyte between 144 and 159
stb := "NoteOn"
if statusbyte between 128 and 143
stb := "NoteOff"
if statusbyte between 224 and 239
stb := "PitchB"
gosub, ShowMidiInMessage ; show updated midi input message on midi monitor gui.
gosub, MidiRules ; run the label in file MidiRules.ahk Edit that file.
}
; end of MidiMsgDetect funciton
Return
;*************************************************
;* SHOW MIDI INPUT ON GUI MONITOR
;*************************************************
ShowMidiInMessage: ; update the midimonitor gui
Gui,14:default
Gui,14:ListView, In1 ; see the first listview midi in monitor
LV_Add("",stb,statusbyte,chan,byte1,byte2)
LV_ModifyCol(1,"center")
LV_ModifyCol(2,"center")
LV_ModifyCol(3,"center")
LV_ModifyCol(4,"center")
LV_ModifyCol(5,"center")
If (LV_GetCount() > 10)
{
LV_Delete(1)
}
return
;*************************************************
;* SHOW MIDI OUTPUT ON GUI MONITOR
;*************************************************
ShowMidiOutMessage: ; update the midimonitor gui
Gui,14:default
Gui,14:ListView, Out1 ; see the second listview midi out monitor
LV_Add("",stb,statusbyte,chan,byte1,byte2)
LV_ModifyCol(1,"center")
LV_ModifyCol(2,"center")
LV_ModifyCol(3,"center")
LV_ModifyCol(4,"center")
LV_ModifyCol(5,"center")
If (LV_GetCount() > 10)
{
LV_Delete(1)
}
return
;*************************************************
;* MIDI MONITOR GUI CODE
;*************************************************
midiMon: ; midi monitor gui with listviews
gui,14:destroy
gui,14:default
gui,14:add,text, x80 y5, Midi Input ; %TheChoice%
Gui,14:Add, DropDownList, x40 y20 w140 Choose%TheChoice% vMidiInPort gDoneInChange altsubmit, %MiList% ; (
gui,14:add,text, x305 y5, Midi Ouput ; %TheChoice2%
Gui,14:Add, DropDownList, x270 y20 w140 Choose%TheChoice2% vMidiOutPort gDoneOutChange altsubmit , %MoList%
Gui,14:Add, ListView, x5 r11 w220 Backgroundblack caqua Count10 vIn1, EventType|StatB|Ch|Byte1|Byte2|
gui,14:Add, ListView, x+5 r11 w220 Backgroundblack cyellow Count10 vOut1, EventType|StatB|Ch|Byte1|Byte2|
gui,14:Show, autosize xcenter y5, MidiMonitor
Return

View File

@ -0,0 +1,558 @@
; !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! no edit below here, unless you know what you are doing.
;*************************************************
;* MIDI UNDER THE HOOD
;* DO NOT EDIT IN HERE, unless you know what
;* what you are doing!
;*************************************************
;****************************************************************************************************************
;******************************************** midi "under the hood" *********************************************
/*
This part is meant to take care of the "under the hood" midi input and output selection and save selection to an ini file.
Hopefully it simplifies usage for others out here trying to do things with midi and ahk.
* use it as an include.
The code here was taken/modified from the work by TomB/Lazslo on Midi Output
http://www.autohotkey.com/forum/viewtopic.php?t=18711&highlight=midi+output
Orbik's Midi input thread
http://www.autohotkey.com/forum/topic30715.html
This method does NOT use the midi_in.dll, it makes direct calls to the winmm.dll
Many different people took part in the creation of this file.
; Last edited 6/17/2010 11:30 AM by genmce
*/
;*************************************************
;* GET PORTS LIST PARSE
;*************************************************
MidiPortRefresh: ; get the list of ports
MIlist := MidiInsList(NumPorts)
Loop Parse, MIlist, |
{
}
TheChoice := MidiInDevice + 1
MOlist := MidiOutsList(NumPorts2)
Loop Parse, MOlist, |
{
}
TheChoice2 := MidiOutDevice + 1
return
;*************************************************
;* LOAD UP SOME STUFF.
;*************************************************
;-----------------------------------------------------------------
ReadIni() ; also set up the tray Menu
{
Menu, tray, add, MidiSet ; set midi ports tray item
Menu, tray, add, ResetAll ; Delete the ini file for testing --------------------------------
menu, tray, add, MidiMon
global MidiInDevice, MidiOutDevice, version ; version var is set at the beginning.
IfExist, %version%.ini
{
IniRead, MidiInDevice, %version%.ini, Settings, MidiInDevice , %MidiInDevice% ; read the midi In port from ini file
IniRead, MidiOutDevice, %version%.ini, Settings, MidiOutDevice , %MidiOutDevice% ; read the midi out port from ini file
}
Else ; no ini exists and this is either the first run or reset settings.
{
MsgBox, 1, No ini file found, Select midi ports?
IfMsgBox, Cancel
ExitApp
IfMsgBox, yes
gosub, midiset
;WriteIni()
}
}
;*************************************************
;* WRITE TO INI FILE FUNCTION
;*************************************************
;CALLED TO UPDATE INI WHENEVER SAVED PARAMETERS CHANGE
WriteIni()
{
global MidiInDevice, MidiOutDevice, version
IfNotExist, %version%io.ini ; if no ini
FileAppend,, %version%io.ini ; make one with the following entries.
IniWrite, %MidiInDevice%, %version%.ini, Settings, MidiInDevice
IniWrite, %MidiOutDevice%, %version%.ini, Settings, MidiOutDevice
}
;*************************************************
;* PORT TESTING
;*************************************************
;------------ port testing to make sure selected midi port is valid --------------------------------
port_test(numports,numports2) ; confirm selected ports exist ; CLEAN THIS UP STILL
{
global midiInDevice, midiOutDevice, midiok
; ----- In port selection test based on numports
If MidiInDevice not Between 0 and %numports%
{
MidiIn := 0 ; this var is just to show if there is an error - set if the ports are valid = 1, invalid = 0
;MsgBox, 0, , midi in port Error ; (this is left only for testing)
If (MidiInDevice = "") ; if there is no midi in device
MidiInerr = Midi In Port EMPTY. ; set this var = error message
;MsgBox, 0, , midi in port EMPTY
If (midiInDevice > %numports%) ; if greater than the number of ports on the system.
MidiInnerr = Midi In Port Invalid. ; set this error message
;MsgBox, 0, , midi in port out of range
}
Else
{
MidiIn := 1 ; setting var to non-error state or valid
}
; ----- out port selection test based on numports2
If MidiOutDevice not Between 0 and %numports2%
{
MidiOut := 0 ; set var to 0 as Error state.
If (MidiOutDevice = "") ; if blank
MidiOuterr = Midi Out Port EMPTY. ; set this error message
;MsgBox, 0, , midi o port EMPTY
If (midiOutDevice > %numports2%) ; if greater than number of availble ports
MidiOuterr = Midi Out Port Out Invalid. ; set this error message
;MsgBox, 0, , midi out port out of range
}
Else
{
MidiOut := 1 ;set var to 1 as valid state.
}
; ---- test to see if ports valid, if either invalid load the gui to select.
;midicheck(MCUin,MCUout)
If (%MidiIn% = 0) Or (%MidiOut% = 0)
{
MsgBox, 49, Midi Port Error!,%MidiInerr%`n%MidiOuterr%`n`nLaunch Midi Port Selection!
IfMsgBox, Cancel
ExitApp
midiok = 0 ; Not sure if this is really needed now....
Gosub, MidiSet ;Gui, show Midi Port Selection
}
Else
{
midiok = 1
Return ; DO NOTHING - PERHAPS DO THE NOT TEST INSTEAD ABOVE.
}
}
Return
;*************************************************
;* MIDI SET GUI
;*************************************************
; ------------------ end of port testing ---------------------------
MidiSet: ; midi port selection gui
; ------------- MIDI INPUT SELECTION -----------------------
Gui, 6: Destroy
Gui, 2: Destroy
Gui, 3: Destroy
Gui, 4: Destroy
Gui, 4: +LastFound +AlwaysOnTop +Caption +ToolWindow ;-SysMenu
Gui, 4: Font, s12
Gui, 4: add, text, x10 y10 w300 cmaroon, Select Midi Ports. ; Text title
Gui, 4: Font, s8
Gui, 4: Add, Text, x10 y+10 w175 Center , Midi In Port ;Just text label
Gui, 4: font, s8
; midi ins list box
Gui, 4: Add, ListBox, x10 w200 h100 Choose%TheChoice% vMidiInPort gDoneInChange AltSubmit, %MiList% ; --- midi in listing of ports
;Gui, Add, DropDownList, x10 w200 h120 Choose%TheChoice% vMidiInPort gDoneInChange altsubmit, %MiList% ; ( you may prefer this style, may need tweak)
; --------------- MidiOutSet ---------------------
Gui, 4: Add, TEXT, x220 y40 w175 Center, Midi Out Port ; gDoneOutChange
; midi outlist box
Gui, 4: Add, ListBox, x220 y62 w200 h100 Choose%TheChoice2% vMidiOutPort gDoneOutChange AltSubmit, %MoList% ; --- midi out listing
;Gui, Add, DropDownList, x220 y97 w200 h120 Choose%TheChoice2% vMidiOutPort gDoneOutChange altsubmit , %MoList%
Gui, 4: add, Button, x10 w205 gSet_Done, Done - Reload script.
Gui, 4: add, Button, xp+205 w205 gCancel, Cancel
;gui, 4: add, checkbox, x10 y+10 vNotShown gDontShow, Do Not Show at startup.
;IfEqual, NotShown, 1
;guicontrol, 4:, NotShown, 1
Gui, 4: show , , %version% Midi Port Selection ; main window title and command to show it.
Return
;-----------------gui done change stuff - see label in both gui listbox line
;44444444444444444444444444 NEED TO EDIT THIS TO REFLECT CHANGES IN GENMCE PRIOR TO SEND OUT
DoneInChange:
gui +lastfound
Gui, Submit, NoHide
Gui, Flash
Gui, 4: Submit, NoHide
Gui, 4: Flash
If %MidiInPort%
UDPort:= MidiInPort - 1, MidiInDevice:= UDPort ; probably a much better way do this, I took this from JimF's qwmidi without out editing much.... it does work same with doneoutchange below.
GuiControl, 4:, UDPort, %MidiIndevice%
WriteIni()
;MsgBox, 32, , midi in device = %MidiInDevice%`nmidiinport = %MidiInPort%`nport = %port%`ndevice= %device% `n UDPort = %UDport% ; only for testing
Return
DoneOutChange:
gui +lastfound
Gui, Submit, NoHide
Gui, Flash
Gui, 4: Submit, NoHide
Gui, 4: Flash
If %MidiOutPort%
UDPort2:= MidiOutPort - 1 , MidiOutDevice:= UDPort2
GuiControl, 4: , UDPort2, %MidiOutdevice%
WriteIni()
;Gui, Destroy
Return
;------------------------ end of the doneout change stuff.
Set_Done: ; aka reload program, called from midi selection gui
Gui, 3: Destroy
Gui, 4: Destroy
sleep, 100
Reload
Return
Cancel:
Gui, Destroy
Gui, 2: Destroy
Gui, 3: Destroy
Gui, 4: Destroy
Gui, 5: Destroy
Return
;*************************************************
;* MIDI OUTPUT - UNDER THE HOOD
;*************************************************
; ********************** Midi output detection
MidiOut: ; Function to load new settings from midi out menu item
OpenCloseMidiAPI()
h_midiout := midiOutOpen(MidiOutDevice) ; OUTPUT PORT 1 SEE BELOW FOR PORT 2
return
ResetAll: ; for development only, leaving this in for a program reset if needed by user
MsgBox, 33, %version% - Reset All?, This will delete ALL settings`, and restart this program!
IfMsgBox, OK
{
FileDelete, %version%.ini ; delete the ini file to reset ports, probably a better way to do this ...
Reload ; restart the app.
}
IfMsgBox, Cancel
Return
GuiClose: ; on x exit app
Suspend, Permit ; allow Exit to work Paused. I just added this yesterday 3.16.09 Can now quit when Paused.
MsgBox, 4, Exit %version%, Exit %version% %ver%? ;
IfMsgBox No
Return
Else IfMsgBox Yes
midiOutClose(h_midiout)
Gui, 6: Destroy
Gui, 2: Destroy
Gui, 3: Destroy
Gui, 4: Destroy
Gui, 5: Destroy
gui, 7: destroy
;gui,
Sleep 100
;winclose, Midi_in_2 ;close the midi in 2 ahk file
ExitApp
;*************************************************
;* MIDI INPUT / OUTPUT UNDER THE HOOD
;*************************************************
;############################################## MIDI LIB from orbik and lazslo#############
;-------- orbiks midi input code --------------
; Set up midi input and callback_window based on the ini file above.
; This code copied from ahk forum Orbik's post on midi input
; nothing below here to edit.
; =============== midi in =====================
Midiin_go:
DeviceID := MidiInDevice ; midiindevice from IniRead above assigned to deviceid
CALLBACK_WINDOW := 0x10000 ; from orbiks code for midi input
Gui, +LastFound ; set up the window for midi data to arrive.
hWnd := WinExist() ;MsgBox, 32, , line 176 - mcu-input is := %MidiInDevice% , 3 ; this is just a test to show midi device selection
hMidiIn =
VarSetCapacity(hMidiIn, 4, 0)
result := DllCall("winmm.dll\midiInOpen", UInt,&hMidiIn, UInt,DeviceID, UInt,hWnd, UInt,0, UInt,CALLBACK_WINDOW, "UInt")
If result
{
MsgBox, Error, midiInOpen Returned %result%`n
;GoSub, sub_exit
}
hMidiIn := NumGet(hMidiIn) ; because midiInOpen writes the value in 32 bit binary Number, AHK stores it as a string
result := DllCall("winmm.dll\midiInStart", UInt,hMidiIn)
If result
{
MsgBox, Error, midiInStart Returned %result%`nRight Click on the Tray Icon - Left click on MidiSet to select valid midi_in port.
;GoSub, sub_exit
}
OpenCloseMidiAPI()
; ----- the OnMessage listeners ----
; #define MM_MIM_OPEN 0x3C1 /* MIDI input */
; #define MM_MIM_CLOSE 0x3C2
; #define MM_MIM_DATA 0x3C3
; #define MM_MIM_LONGDATA 0x3C4
; #define MM_MIM_ERROR 0x3C5
; #define MM_MIM_LONGERROR 0x3C6
OnMessage(0x3C1, "MidiMsgDetect") ; calling the function MidiMsgDetect in get_midi_in.ahk
OnMessage(0x3C2, "MidiMsgDetect")
OnMessage(0x3C3, "MidiMsgDetect")
OnMessage(0x3C4, "MidiMsgDetect")
OnMessage(0x3C5, "MidiMsgDetect")
OnMessage(0x3C6, "MidiMsgDetect")
Return
;*************************************************
;* MIDI IN PORT HANDLING
;*************************************************
;--- MIDI INS LIST FUNCTIONS - port handling -----
MidiInsList(ByRef NumPorts)
{ ; Returns a "|"-separated list of midi output devices
local List, MidiInCaps, PortName, result
VarSetCapacity(MidiInCaps, 50, 0)
VarSetCapacity(PortName, 32) ; PortNameSize 32
NumPorts := DllCall("winmm.dll\midiInGetNumDevs") ; #midi output devices on system, First device ID = 0
Loop %NumPorts%
{
result := DllCall("winmm.dll\midiInGetDevCapsA", UInt,A_Index-1, UInt,&MidiInCaps, UInt,50, UInt)
If (result OR ErrorLevel) {
List .= "|-Error-"
Continue
}
DllCall("RtlMoveMemory", Str,PortName, UInt,&MidiInCaps+8, UInt,32) ; PortNameOffset 8, PortNameSize 32
List .= "|" PortName
}
Return SubStr(List,2)
}
MidiInGetNumDevs() { ; Get number of midi output devices on system, first device has an ID of 0
Return DllCall("winmm.dll\midiInGetNumDevs")
}
MidiInNameGet(uDeviceID = 0) { ; Get name of a midiOut device for a given ID
;MIDIOUTCAPS struct
; WORD wMid;
; WORD wPid;
; MMVERSION vDriverVersion;
; CHAR szPname[MAXPNAMELEN];
; WORD wTechnology;
; WORD wVoices;
; WORD wNotes;
; WORD wChannelMask;
; DWORD dwSupport;
VarSetCapacity(MidiInCaps, 50, 0) ; allows for szPname to be 32 bytes
OffsettoPortName := 8, PortNameSize := 32
result := DllCall("winmm.dll\midiInGetDevCapsA", UInt,uDeviceID, UInt,&MidiInCaps, UInt,50, UInt)
If (result OR ErrorLevel) {
MsgBox Error %result% (ErrorLevel = %ErrorLevel%) in retrieving the name of midi Input %uDeviceID%
Return -1
}
VarSetCapacity(PortName, PortNameSize)
DllCall("RtlMoveMemory", Str,PortName, Uint,&MidiInCaps+OffsettoPortName, Uint,PortNameSize)
Return PortName
}
MidiInsEnumerate() { ; Returns number of midi output devices, creates global array MidiOutPortName with their names
local NumPorts, PortID
MidiInPortName =
NumPorts := MidiInGetNumDevs()
Loop %NumPorts% {
PortID := A_Index -1
MidiInPortName%PortID% := MidiInNameGet(PortID)
}
Return NumPorts
}
;*************************************************
;* MIDI OUT LIBRARY FROM lASZLO/TOMB
; Modified by JimF - removed long message
; handling as well as combining status byte with ch
; see commented out section below if you want to change it back
;*************************************************
; =============== end of midi selection stuff
MidiOutsList(ByRef NumPorts)
{ ; Returns a "|"-separated list of midi output devices
local List, MidiOutCaps, PortName, result
VarSetCapacity(MidiOutCaps, 50, 0)
VarSetCapacity(PortName, 32) ; PortNameSize 32
NumPorts := DllCall("winmm.dll\midiOutGetNumDevs") ; #midi output devices on system, First device ID = 0
Loop %NumPorts%
{
result := DllCall("winmm.dll\midiOutGetDevCapsA", UInt,A_Index-1, UInt,&MidiOutCaps, UInt,50, UInt)
If (result OR ErrorLevel)
{
List .= "|-Error-"
Continue
}
DllCall("RtlMoveMemory", Str,PortName, UInt,&MidiOutCaps+8, UInt,32) ; PortNameOffset 8, PortNameSize 32
List .= "|" PortName
}
Return SubStr(List,2)
}
;---------------------midiOut from TomB and Lazslo and JimF --------------------------------
;THATS THE END OF MY STUFF (JimF) THE REST ID WHAT LASZLo AND PAXOPHONE WERE USING ALREADY
;AHK FUNCTIONS FOR MIDI OUTPUT - calling winmm.dll
;http://msdn.microsoft.com/library/default.asp?url=/library/en-us/multimed/htm/_win32_multimedia_functions.asp
;Derived from Midi.ahk dated 29 August 2008 - streaming support removed - (JimF)
OpenCloseMidiAPI() { ; at the beginning to load, at the end to unload winmm.dll
static hModule
If hModule
DllCall("FreeLibrary", UInt,hModule), hModule := ""
If (0 = hModule := DllCall("LoadLibrary",Str,"winmm.dll")) {
MsgBox Cannot load libray winmm.dll
Exit
}
}
;FUNCTIONS FOR SENDING SHORT MESSAGES
midiOutOpen(uDeviceID = 0) { ; Open midi port for sending individual midi messages --> handle
strh_midiout = 0000
result := DllCall("winmm.dll\midiOutOpen", UInt,&strh_midiout, UInt,uDeviceID, UInt,0, UInt,0, UInt,0, UInt)
If (result or ErrorLevel) {
MsgBox There was an Error opening the midi port.`nError code %result%`nErrorLevel = %ErrorLevel%
Return -1
}
Return UInt@(&strh_midiout)
}
midiOutShortMsg(h_midiout, MidiStatus, Param1, Param2) { ;Channel,
;h_midiout: handle to midi output device returned by midiOutOpen
;EventType, Channel combined -> MidiStatus byte: http://www.harmony-central.com/MIDI/Doc/table1.html
;Param3 should be 0 for PChange, ChanAT, or Wheel
;Wheel events: entire Wheel value in Param2 - the function splits it into two bytes
/*
If (EventType = "NoteOn" OR EventType = "N1")
MidiStatus := 143 + Channel
Else If (EventType = "NoteOff" OR EventType = "N0")
MidiStatus := 127 + Channel
Else If (EventType = "CC")
MidiStatus := 175 + Channel
Else If (EventType = "PolyAT" OR EventType = "PA")
MidiStatus := 159 + Channel
Else If (EventType = "ChanAT" OR EventType = "AT")
MidiStatus := 207 + Channel
Else If (EventType = "PChange" OR EventType = "PC")
MidiStatus := 191 + Channel
Else If (EventType = "Wheel" OR EventType = "W") {
MidiStatus := 223 + Channel
Param2 := Param1 >> 8 ; MSB of wheel value
Param1 := Param1 & 0x00FF ; strip MSB
}
*/
result := DllCall("winmm.dll\midiOutShortMsg", UInt,h_midiout, UInt, MidiStatus|(Param1<<8)|(Param2<<16), UInt)
If (result or ErrorLevel) {
MsgBox There was an Error Sending the midi event: (%result%`, %ErrorLevel%)
Return -1
}
}
midiOutClose(h_midiout) { ; Close MidiOutput
Loop 9 {
result := DllCall("winmm.dll\midiOutClose", UInt,h_midiout)
If !(result or ErrorLevel)
Return
Sleep 250
}
MsgBox Error in closing the midi output port. There may still be midi events being Processed.
Return -1
}
;UTILITY FUNCTIONS
MidiOutGetNumDevs() { ; Get number of midi output devices on system, first device has an ID of 0
Return DllCall("winmm.dll\midiOutGetNumDevs")
}
MidiOutNameGet(uDeviceID = 0) { ; Get name of a midiOut device for a given ID
;MIDIOUTCAPS struct
; WORD wMid;
; WORD wPid;
; MMVERSION vDriverVersion;
; CHAR szPname[MAXPNAMELEN];
; WORD wTechnology;
; WORD wVoices;
; WORD wNotes;
; WORD wChannelMask;
; DWORD dwSupport;
VarSetCapacity(MidiOutCaps, 50, 0) ; allows for szPname to be 32 bytes
OffsettoPortName := 8, PortNameSize := 32
result := DllCall("winmm.dll\midiOutGetDevCapsA", UInt,uDeviceID, UInt,&MidiOutCaps, UInt,50, UInt)
If (result OR ErrorLevel) {
MsgBox Error %result% (ErrorLevel = %ErrorLevel%) in retrieving the name of midi output %uDeviceID%
Return -1
}
VarSetCapacity(PortName, PortNameSize)
DllCall("RtlMoveMemory", Str,PortName, Uint,&MidiOutCaps+OffsettoPortName, Uint,PortNameSize)
Return PortName
}
MidiOutsEnumerate() { ; Returns number of midi output devices, creates global array MidiOutPortName with their names
local NumPorts, PortID
MidiOutPortName =
NumPorts := MidiOutGetNumDevs()
Loop %NumPorts% {
PortID := A_Index -1
MidiOutPortName%PortID% := MidiOutNameGet(PortID)
}
Return NumPorts
}
UInt@(ptr) {
Return *ptr | *(ptr+1) << 8 | *(ptr+2) << 16 | *(ptr+3) << 24
}
PokeInt(p_value, p_address) { ; Windows 2000 and later
DllCall("ntdll\RtlFillMemoryUlong", UInt,p_address, UInt,4, UInt,p_value)
}

View File

@ -1,4 +1,7 @@
# Volume knob -> AHK -> Voicemeeter interface # Korg NanoKontrol2 -> AHK -> VoiceMeeter
This is a little thing I slapped together so that I can control all sorts of VoiceMeeter things with the volume knob on my K70.
I also have things in there to mimic Discord's Muting and Deafening features. This is something I threw together from multiple different sources for the VoiceMeeter control with AHK to the MIDI interaction with AHK.
This should be good to go, I also included the "Scene data file" (the config) for the Korg software to configure the channels and CCs for the sliders as I have it set up. I'll make a YouTube video of it sometime soon.
After first startup if you would no longer like the dialog box that shows the MIDI output to show, you can change line 1 of `MidiStart.ahk` to read `ShowGUI := False`. You can edit AHK files in any plaintext editor, including notepad.

302
VB.ahk
View File

@ -4,6 +4,7 @@
#HotkeyInterval 99000000 #HotkeyInterval 99000000
#KeyHistory 0 #KeyHistory 0
#UseHook #UseHook
#Persistent
ListLines Off ListLines Off
SendMode Input ; Recommended for new scripts due to its superior speed and reliability. SendMode Input ; Recommended for new scripts due to its superior speed and reliability.
SetTitleMatchMode RegEx SetTitleMatchMode RegEx
@ -56,9 +57,203 @@ if (login_result == 1) {
Sleep 2000 Sleep 2000
} }
; == MIDI ==
; ==========
#Include, MIDI\MidiStart.ahk
#Include, MIDI\Midi_In_and_GuiMonitor.ahk ; this file contains: the function to parse midi message into parts we can work with and a midi monitor.
#Include, MIDI\MidiRules.ahk ; this file contains: Rules for manipulating midi input then sending modified midi output.
#Include, MIDI\Midi_under_the_hood.ahk ; this file contains: (DO NOT EDIT THIS FILE) all the dialogs to set up midi ports and midi message handling.
midiCCin:
cc := byte1 ; The Control Channel
val := byte2 ; The value (0-127 for faders, 0 or 1 for buttons (that part is set with the software))
Switch chan
{
Case 1: ; The first fader: Work Laptop Out
Switch cc
{
Case 0:
Lvl := fader_to_fader(val)
adjustVolLvl("Strip[0]" . ".Gain", Lvl)
Return
Case 1:
Lvl := dial_to_pan(val)
adjustVolLvl("Strip[0]" . ".Pan_x", Lvl)
Case 2:
adjustToggle("Strip[0]" . ".Solo", val)
Return
Case 3:
adjustToggle("Strip[0]" . ".Mute", val)
Return
Case 4:
adjustToggle("Strip[0]" . ".B2", val)
Return
Default:
Return
}
Case 2: ; The second fader: Work Laptop In
Switch cc
{
Case 0:
Lvl := fader_to_fader(val)
adjustVolLvl("Bus[2]" . ".Gain", Lvl)
Return
Case 3:
adjustToggle("Bus[2]" . ".Mute", val)
Return
Default:
Return
}
Case 3: ; The third fader: Desktop Audio
Switch cc
{
Case 0:
Lvl := fader_to_fader(val)
adjustVolLvl("Strip[3]" . ".Gain", Lvl)
Return
Case 1:
Lvl := dial_to_pan(val)
adjustVolLvl("Strip[3]" . ".Pan_x", Lvl)
Case 2:
adjustToggle("Strip[3]" . ".Solo", val)
Return
Case 3:
adjustToggle("Strip[3]" . ".Mute", val)
Return
Case 4:
adjustToggle("Strip[3]" . ".B2", val)
Return
Default:
Return
}
Case 4: ; The third fader: Comms In
Switch cc
{
Case 0:
Lvl := fader_to_fader(val)
adjustVolLvl("Bus[3]" . ".Gain", Lvl)
Return
Case 3:
adjustToggle("Bus[3]" . ".Mute", val)
Return
Default:
Return
}
Case 5: ; The fifth fader: Comms Out
Switch cc
{
Case 0:
Lvl := fader_to_fader(val)
adjustVolLvl("Strip[4]" . ".Gain", Lvl)
Return
Case 1:
Lvl := dial_to_pan(val)
adjustVolLvl("Strip[4]" . ".Pan_x", Lvl)
Case 2:
adjustToggle("Strip[4]" . ".Solo", val)
Return
Case 3:
adjustToggle("Strip[4]" . ".Mute", val)
Return
Case 4:
adjustToggle("Strip[4]" . ".B2", val)
Return
Default:
Return
}
Case 6: ; The sixth fader: Speakers
Switch cc
{
Case 0:
Lvl := fader_to_fader(val)
adjustVolLvl("Bus[0]" . ".Gain", Lvl)
Return
Case 3:
adjustToggle("Bus[0]" . ".Mute", val)
Return
Default:
Return
}
Case 7: ; The seventh fader: Mic
Switch cc
{
Case 0:
Lvl := fader_to_fader(val)
adjustVolLvl("Bus[1]" . ".Gain", Lvl)
Return
Case 3:
adjustToggle("Bus[1]" . ".Mute", val)
Return
Default:
Return
}
Case 8: ; The eighth fader: Music
Switch cc
{
Case 0:
Lvl := fader_to_fader(val)
adjustVolLvl("Strip[2]" . ".Gain", Lvl)
Return
Case 1:
Lvl := dial_to_pan(val)
adjustVolLvl("Strip[2]" . ".Pan_x", Lvl)
Case 2:
adjustToggle("Strip[2]" . ".Solo", val)
Return
Case 3:
adjustToggle("Strip[2]" . ".Mute", val)
Return
Case 4:
adjustToggle("Strip[2]" . ".B1", val)
adjustToggle("Strip[2]" . ".B2", val)
Return
Default:
Return
}
Case 10: ; VoiceMeeter recorder controls
Switch cc
{
Case 7: ; Rewind
adjustToggle("Recorder" . ".REW", val)
Return
Case 8: ; Fast Forward
adjustToggle("Recorder" . ".FF", val)
Return
Case 9:
adjustToggle("Recorder" . ".Stop", val)
Return
Case 10:
adjustToggle("Recorder" . ".Play", val)
Return
Case 11:
adjustToggle("Recorder" . ".Record", val)
Return
Default:
Return
}
Default:
Return
}
Return
fader_to_fader(val) ; Translates MIDI fader values to the VoiceMeeter software faders
{
; The upper limit for faders in VM is 12.0
; The lower limit for the faders in VM that I would like is -40.0, how low it should go when the physical fader is all the way at the bottom
nval := Round(((val / 127) * 52) - 40)
Return nval
}
; Formula: ((value / max value) * total range) - negative part of range
dial_to_pan(val)
{
nval := Round((val / 127) - 0.5, 2)
Return nval
}
; == HOTKEYS == ; == HOTKEYS ==
; ============= ; =============
/*
Volume_Up:: Volume_Up::
If GetKeyState("ScrollLock", "T") ; Control music volume if scroll lock is on If GetKeyState("ScrollLock", "T") ; Control music volume if scroll lock is on
{ {
@ -130,51 +325,37 @@ Volume_Down::
} }
} }
return return
*/
Volume_Mute:: Volume_Mute::
If (GetKeyState("Media_Stop")) ; Mutes all output. Basically a kill switch b0M := Round(readParam("Bus[0]" . ".Mute")) ; Speakers
{ b1M := Round(readParam("Bus[1]" . ".Mute")) ; Headphones
b0M := Round(readParam("Bus[0]" . ".Mute")) ; Speakers cM := b0M + b1M
b1M := Round(readParam("Bus[1]" . ".Mute")) ; Headphones
cM := b0M + b1M
if (cM = "2") if (cM = "2")
{ ; Unmute the ones that were unmuted before { ; Unmute the ones that were unmuted before
adjustMute("Bus[0]" . ".Mute", b0Ms) ; Speakers adjustToggle("Bus[0]" . ".Mute", b0Ms) ; Speakers
adjustMute("Bus[1]" . ".Mute", b1Ms) ; Headphones adjustToggle("Bus[1]" . ".Mute", b1Ms) ; Headphones
} else { } else {
if !(b0M) ; Speakers if !(b0M) ; Speakers
{ {
b0Ms := True b0Ms := True
} else { } else {
b0Ms := False b0Ms := False
} }
if !(b1M) ; Headphones if !(b1M) ; Headphones
{ {
b1Ms := True b1Ms := True
} else { } else {
b1Ms := False b1Ms := False
} }
; Mute ; Mute
adjustMute("Bus[0]" . ".Mute", "0") ; Speakers adjustToggle("Bus[0]" . ".Mute", "0") ; Speakers
adjustMute("Bus[1]" . ".Mute", "0") ; Headphones adjustToggle("Bus[1]" . ".Mute", "0") ; Headphones
}
Return
} }
cM := Round(readParam("Bus[1]" . ".Mute")) ; Toggles between the speakers and headphones being muted, normal operation Return
if (cM)
{
adjustMute("Bus[0]" . ".Mute", "0") ; Speakers
adjustMute("Bus[1]" . ".Mute", "1") ; Headphones
}
if !(cM)
{
adjustMute("Bus[0]" . ".Mute", "1") ; Speakers
adjustMute("Bus[1]" . ".Mute", "0") ; Headphones
}
return
/*
!m:: ; Mute: No audio out !m:: ; Mute: No audio out
Send {F23} Send {F23}
b3M := Round(readParam("Bus[3]" . ".Mute")) ; Comms IN b3M := Round(readParam("Bus[3]" . ".Mute")) ; Comms IN
@ -182,16 +363,16 @@ return
If (s4M) If (s4M)
{ {
adjustMute("Bus[3]" . ".Mute", "1") ; Comms IN adjustToggle("Bus[3]" . ".Mute", "1") ; Comms IN
adjustMute("Strip[4]" . ".Mute", "1") ; Comms OUT adjustToggle("Strip[4]" . ".Mute", "1") ; Comms OUT
return return
} }
If !(b3M) If !(b3M)
{ {
adjustMute("Bus[3]" . ".Mute", "0") adjustToggle("Bus[3]" . ".Mute", "0")
} else { } else {
adjustMute("Bus[3]" . ".Mute", "1") adjustToggle("Bus[3]" . ".Mute", "1")
} }
Return Return
@ -201,12 +382,12 @@ Return
If (s4M) If (s4M)
{ {
adjustMute("Bus[3]" . ".Mute", "1") ; Comms IN adjustToggle("Bus[3]" . ".Mute", "1") ; Comms IN
adjustMute("Strip[4]" . ".Mute", "1") ; Comms OUT adjustToggle("Strip[4]" . ".Mute", "1") ; Comms OUT
} else { } else {
adjustMute("Bus[3]" . ".Mute", "0") ; Comms IN adjustToggle("Bus[3]" . ".Mute", "0") ; Comms IN
Sleep, 650 ; Delay so that the "deafened" sound from discord can play Sleep, 650 ; Delay so that the "deafened" sound from discord can play
adjustMute("Strip[4]" . ".Mute", "0") ; Comms OUT adjustToggle("Strip[4]" . ".Mute", "0") ; Comms OUT
} }
Return Return
@ -216,21 +397,21 @@ Return
if (cM) if (cM)
{ {
adjustMute("Bus[2]" . ".Mute", "1") ; Work Laptop adjustToggle("Bus[2]" . ".Mute", "1") ; Work Laptop
adjustMute("Bus[3]" . ".Mute", "0") ; Comms IN adjustToggle("Bus[3]" . ".Mute", "0") ; Comms IN
adjustMute("Strip[3]" . ".Mute", "0") ; Desktop adjustToggle("Strip[3]" . ".Mute", "0") ; Desktop
Sleep, 650 ; Delay so that the "deafened" sound from discord can play Sleep, 650 ; Delay so that the "deafened" sound from discord can play
adjustMute("Strip[4]" . ".Mute", "0") ; Comms OUT adjustToggle("Strip[4]" . ".Mute", "0") ; Comms OUT
} }
if !(cM) if !(cM)
{ {
adjustMute("Bus[2]" . ".Mute", "0") ; Work Laptop adjustToggle("Bus[2]" . ".Mute", "0") ; Work Laptop
adjustMute("Bus[3]" . ".Mute", "1") ; Comms IN adjustToggle("Bus[3]" . ".Mute", "1") ; Comms IN
adjustMute("Strip[4]" . ".Mute", "1") ; Comms OUT adjustToggle("Strip[4]" . ".Mute", "1") ; Comms OUT
adjustMute("Strip[3]" . ".Mute", "1") ; Desktop adjustToggle("Strip[3]" . ".Mute", "1") ; Desktop
} }
Return Return
*/
; == Functions == ; == Functions ==
; =============== ; ===============
@ -265,7 +446,7 @@ adjustVolLvl(loc, tVol) {
DllCall(VMR_FUNCTIONS["SetParameterFloat"], "AStr", loc, "Float", tVol, "Int") DllCall(VMR_FUNCTIONS["SetParameterFloat"], "AStr", loc, "Float", tVol, "Int")
} }
adjustMute(loc, tM) { adjustToggle(loc, tM) {
if (tM = 0) if (tM = 0)
tM := 1 tM := 1
else else
@ -273,6 +454,8 @@ adjustMute(loc, tM) {
DllCall(VMR_FUNCTIONS["SetParameterFloat"], "AStr", loc, "Float", tM, "Int") DllCall(VMR_FUNCTIONS["SetParameterFloat"], "AStr", loc, "Float", tM, "Int")
} }
add_vmr_function(func_name) { add_vmr_function(func_name) {
VMR_FUNCTIONS[func_name] := DllCall("GetProcAddress", "Ptr", VMR_MODULE, "AStr", "VBVMR_" . func_name, "Ptr") VMR_FUNCTIONS[func_name] := DllCall("GetProcAddress", "Ptr", VMR_MODULE, "AStr", "VBVMR_" . func_name, "Ptr")
if (ErrorLevel || VMR_FUNCTIONS[func_name] == 0) if (ErrorLevel || VMR_FUNCTIONS[func_name] == 0)
@ -289,4 +472,3 @@ die(die_string:="UNSPECIFIED FATAL ERROR.", exit_status:=254) {
MsgBox 16, FATAL ERROR, %die_string% MsgBox 16, FATAL ERROR, %die_string%
ExitApp exit_status ExitApp exit_status
} }

BIN
settings.nktrl2_data Normal file

Binary file not shown.